6
MODEL NO. RD7000TL+
Passive Frequencies:
Power
✔
Radio
✔
Active Frequencies:
512Hz
✔
640Hz
✔
8kHz
✔
33kHz
✔
65kHz
✔
131kHz
✔
200kHz
✔
Sonde Frequencies:
512Hz
✔
640Hz
✔
33kHz
✔
Features:
Compass
✔
Dynamic Overload Protection
✔
TruDepth
™
✔
Peak mode
✔
Null mode
✔
Peak/Null mode
✔
8kHz Fault Find
✔
StrikeAlert
™
✔
Centros
™
✔
eCAL
™
✔
MODEL NO. RD7000PL+
Passive Frequencies:
Power
✔
Radio
✔
Active Frequencies:
512Hz
✔
640Hz
✔
8kHz
✔
33kHz
✔
65kHz
✔
Sonde Frequencies:
33kHz
✔
Features:
Compass
✔
Dynamic Overload Protection
✔
TruDepth
™
✔
Peak mode
✔
Depth in Power mode
✔
8kHz Fault Find
✔
Null mode
✔
Peak/Null mode
✔
StrikeAlert
™
✔
Centros
™
✔
eCAL
™
✔
RD7000PL
+
POWER INDUSTRY
The RD7000PL+ identifies the target cable reliably, even in areas of large-scale, trunked
cable deployment of complex electrical networks.
One of the biggest challenges to operators working in the power industry is locating pipes
and cables when operating near high voltage environments, such as substations and
conduits where the presence of large signals overpower most locators.
The RD7000PL+ is designed for use in areas where excessive magnetic fields, generated
by high voltage equipment and cables, can prevent accurate locating. Dynamic Overload
Protection reduces this effect, allowing uncompromised locator accuracy.
The RD7000PL+ has both Peak and Null modes and also a combined Peak/Null mode
which allows the identification of signal/ground distortion effects by displaying both Peak
and Null response simultaneously.
In addition, the RD7000PL+ can indicate depth in Power mode. This is particularly useful
when direct connection of a transmitter to a power cable may be hazardous or impractical.
The Compass feature aids correct alignment with the target cable, maximising depth
measurement accuracy.
The 8kHz Fault Find function is a technique that locates a cable sheath fault using an
A-frame attached to the Locator. On-screen arrows help show the fault’s direction and help
the operator locate the fault accurately to within 4" (10cm).
RD7000TL
+
TELECOM INDUSTRY
Large bundled pairs of cables require specialized location equipment to find a selected signal.
As the Telecommunication utilities continue to deploy highly insulated copper or fiber cables,
tracing bundled cables becomes harder. The RD7000TL+ features additional high locate
frequencies capable of pinpointing high impedance cables to help address this problem.
Most domestic telecom cables have no earth but are sheathed; using high frequencies
allows tracing without needing to ground connections. Once the correct pipe or cable is
located, the operator can accurately locate any cable sheath faults to within 4" (10cm)
meter using 8kHz Fault Find mode with a Radiodetection A-Frame.
The RD7000TL+ has both Peak and Null modes and also a combined Peak/Null mode
which allows the identification of signal/ground distortion effects by displaying both Peak
and Null response simultaneously.
Featuring Compass and Dynamic Overload Protection as standard, the RD7000TL+ aids
cable and pipe location even in electrically noisy environments, while the addition of three
sonde frequencies adds more capability and flexibility.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais