10
TECHNICAL SPECIFICATIONS FOR LOCATOR AND TRANSMITTER
Features are model dependant
Sensitivity 5µA at 1 meter (33kHz)
Dynamic range 140dB rms/√Hz
Selectivity 120dB/Hz
Maximum depth
(1)
Line: 20' / 6m
Sonde: 50' / 15m
RF Markers:
Near Surface: 2' / 60cm
Ball Marker: 4.9' / 1.5m
Mid-Range: 5.9' / 1.8m
Full Range: 7.9' / 2.4m
Depth accuracy
(2)
Line: ± 5% tolerance 4" / 0.1m to 10' / 3m
Sonde: ± 5% tolerance 4" / 0.1m to 23' / 7m
RF Markers: ± 15% ± 2" / 5cm up to the maximum depth
Locate accuracy ± 5% of depth
Fault-Finding (FF) Diagnose cable sheath faults from short circuit to 2MΩ using the
A-frame
Max Transmitter Power output 1W (Tx-1), 5W (Tx-5 and Tx-5B), 10W (Tx-10 and Tx-10B)
Dynamic overload protection 30dB (automatic)
Batteries Cable and Pipe Locator: 2 x D-cells (LR20) or optional Li-Ion battery pack
Marker locator: Li-Ion battery pack or 3 x D-cells (LR20)
Transmitter: 8 x D-cells (LR20) or optional Li-Ion battery pack
Battery Life (continuous usage)
(3)
Cable and Pipe Locator: Alkaline up to 13 hours
Marker Locator: Li-Ion or Alkaline up to 25 hours
Transmitter: Alkaline up to 23 hours
Warranty 12 Month standard, 36 Months upon registration
Compliance FCC, RSS 310 RoHS, WEEE
Approvals CE, Bluetooth
Weight Cable and Pipe Locator: 4.2lbs / 1.9kg (including alkaline batteries)
Marker Locator: 4.6lbs / 2.1kg (including Li-Ion battery pack)
Transmitter: 6.2lbs / 2.8kg (including alkaline batteries)
9.3lbs / 4.2kg (including accessories)
Dimension (H x D x W) Cable and Pipe Locator: 25.5" x 11.3" x 4.9" / 648 x 286 x 125mm
Marker Locator: 25.5" x 11.3" x 7" / 648 x 286 x 177mm
Transmitter: 14" x 8.9" x 8.1" / 356 x 227 x 207mm
Construction Injection Molded ABS Plastic
Ingress Protection IP54
Operating Temperature 14 to 122°F / -10 to 50°C
(1)
In Good Conditions.
(2)
RD7000 will locate to greater depths but accuracy may be reduced.
(3)
At 70°F / 21°C with good quality batteries, transmitter output set to 1W.
LOCATOR ACCESSORIES
The precision locator accessory range offers
a wide choice of add-ons including fault find
‘A-frames,’ current measurement clamps and
submersible antennas, as well as offering
the convenience of alternative power source
options and on-line calibration validation.
TRANSMITTER ACCESSORIES
The range of TX transmitter accessories
is designed to improve the coupling of
transmitter signals onto utilities as well as
adding extra functionalities, for example
the ability to locate 3 phase LV cable
core-to-core short-circuits. A wide choice
of alternative power supply options are
also available.
ACCESSORIES FOR TRACING
NON-CONDUCTIVE UTILITIES
Radiodetection offers a range of sondes and
flexible rods designed to enable operators to
trace non-conductive (e.g. plastic or ceramic)
utilities, for example the flexitrace connected
to a TX allows users to easily trace a pipe or
pinpoint a specific location.
STORAGE AND TRANSPORT
ACCESSORIES
Radiodetection offers a range of soft
and hard cases designed to offer a
practical and durable transport solution
for locators, transmitter and accessories.
Trademarks and Notices.
Our products are covered by the following intellectual property rights:
The following are trademarks of Radiodetection: TruDepth, SideStep, SideStepauto, SurveyCERT, RD7000, RD8000.
The Design of the RD7000+, RD8000 and transmitters has been registered. The Design of the 4 chevrons has been registered.
The Bluetooth word, mark and logos are registered trademarks of Bluetooth SIG, Inc. and any use of such trademarks by Radiodetection is under license. Microsoft and Windows Mobile are
either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries
(10 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais